Directa Logo
        

Ceramir® CAD/CAM BLOCKS

Strong and flexible with high aesthetic appearance

Ceramir CAD/CAM BLOCKS are a new type of CAD/CAM material. They are manufactured using advanced patented laser sintering technology, creating a single glass phase material embedded in a hybrid matrix. This results in that Ceramir CAD/CAM BLOCKS have the strength of particle infiltrated ceramics (lithium disilicate), the aesthetics comparable of feldspathic glass-ceramics, but without the brittleness of pure ceramics, and with the flexibility similar to dentin (20 GPa), which reduces tension during masticatory load and creates a shock-absorbing effect, decreasing occlusal stress.

Ceramir CAD/CAM BLOCKS have a natural translucency due to their homogeneous glass-like structure. They reflect light and, after a short polishing, have a high gloss surface that resembles natural teeth. Ceramir CAD / CAM BLOCKS offer a unique combination of strength, flexibility and aesthetics and can be used for a wide range of indications, including crowns, inlays, onlays and veneers.

The advantage with Ceramir CAD/CAM BLOCKs is that it can be milled to very thin margins while maintaining a high edge stability. A full crown will need a thickness of 1,5 mm in areas with cusps and occlusal contacts, whilst veneers can be milled down to as little as 0,3-0,5 mm with remained smooth edge providing as little gap formation as possible.

Due to the composition of the material, restorations made with Ceramir CAD/CAM BLOCKS can be easily repaired with composite in the mouth, if necessary.
Ceramir CAD/CAM BLOCKS have unique properties that allow shorter milling times compared to other CAD/CAM blocks. This reduces chairside time and saves money because the milling burs last longer. Ceramir CAD/CAM BLOCKS also eliminate the need for additional firing, saving even more time and equipment.

 

Reasons to use Ceramir® CAD/CAM BLOCKS

• Strong & flexible
• High aesthetic appearance
• High edge stability
• Cost effective & easy handling

 

Types sizes and colour

Available in standard size 12 x 14 x 18 mm.
- T-BLOCK Translucent Enamel. Ceramir T-BLOCKS are highly translucent blocks that mimic the natural enamel.
- C-BLOCK Chroma - highly chromatic blocks correspond to shades A0, A1 A2 and A3.
- Ceramir i-BLOCK Translucent Enamel. Chroma.

Ceramir CAD/CAM BLOCKS are used for precise and reliable fabrication of implant supported restorations. They fit precisely onto titanium base (Ti-Base) or similar attachments so that the final restoration can be placed in the same appointment to save time and cost and to improve the patient’s experience.

Ceramir i-BLOCKs can be used as screw retained single abutment crowns as well as for mesostructure (abutment) and final crowns. Its antibacterial properties and it´s form, which maintains a good mucosal seal, help to prevent biofilm and bacteria growth on the restoration surface. The composition of the material creates a shock absorbing effect comparable to the one of a natural tooth to withstand occlusal stress.

Ceramir i-BLOCKS are compatible with all systems that provide a Ti-Base interface.

 

Request order at selected distributor

Directa will forward your order to your selected distributor. The prices listed are based on the manufacturer's suggested retail price and does not include exchange rates, shipping, tax or additional costs that may incurre. Depending on pricing and exchange rate at your distributor the prices may vary. You will be contacted by your distributor to confirm your order and payment method.

Please note that some products cannot be delivered to all countries. Directa could remove the item from your order without any notification. The delivery time can be extended if the selected distributor does not have your product of choice. Directa disclaims all responsibility for delivery or final pricing. Contact customer service if you have any queries.


805187 - Ceramir CAD/CAM T-BLOCK Universal Enamel, 5x Ceramir CAD/CAM BLOCK Translucent (Universal Enamel) in size 12x14x18mm
€ 204,80    
805188 - Ceramir CAD/CAM C-BLOCK A0, 5x Ceramir CAD/CAM C-BLOCK Chroma (A0) in size 12x14x18mm
€ 204,80    
805189 - Ceramir CAD/CAM C-BLOCK A1, 5x Ceramir CAD/CAM C-BLOCK Chroma (A1) in size 12x14x18mm
€ 204,80    
805190 - Ceramir CAD/CAM C-BLOCK A2, 5x Ceramir CAD/CAM C-BLOCK Chroma (A2) in size 12x14x18mm
€ 204,80    
805191 - Ceramir CAD/CAM C-BLOCK A3, 5x Ceramir CAD/CAM C-BLOCK Chroma (A3) in size 12x14x18mm
€ 204,80    
805192 - Ceramir CAD/CAM i-BLOCK (S) Universal Enamel, 5x Ceramir CAD/CAM Translucent (Universal Enamel) in size 12x14x18mm with abutment hole S
€ 266,70    
805193 - Ceramir CAD/CAM i-BLOCK (S) A0, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A0) in size 12x14x18mm with abutment hole S
€ 266,70    
805194 - Ceramir CAD/CAM i-BLOCK (S) A1, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A1) in size 12x14x18mm with abutment hole S
€ 266,70    
805195 - Ceramir CAD/CAM i-BLOCK (S) A2, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A2) in size 12x14x18mm with abutment hole S
€ 266,70    
805196 - Ceramir CAD/CAM i-BLOCK (S) A3, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A3) in size 12x14x18mm with abutment hole S
€ 266,70    
805197 - Ceramir CAD/CAM i-BLOCK (L) Universal Enamel, 5x Ceramir CAD/CAM Translucent (Universal Enamel) in size 12x14x18mm with abutment hole L
€ 266,70    
805198 - Ceramir CAD/CAM i-BLOCK (L) A0, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A0) in size 12x14x18mm with abutment hole L
€ 266,70    
805199 - Ceramir CAD/CAM i-BLOCK (L) A1, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A1) in size 12x14x18mm with abutment hole L
€ 266,70    
805200 - Ceramir CAD/CAM i-BLOCK (L) A2, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A2) in size 12x14x18mm with abutment hole L
€ 266,70    
805201 - Ceramir CAD/CAM i-BLOCK (L) A3, 5x Ceramir CAD/CAM i-BLOCK Chroma (colour A3) in size 12x14x18mm with abutment hole L
€ 266,70    

Image Gallery

3 Step Download:
- Left click on the desired image from the gallery.
- Left click on the name of the image BELOW the actual image.
- Right click on the image, choose ?Save picture as? and save.

Subscribe to our newsletter to get product information, news and special offers from DirectaDentalGroup.

Firstname


GDPR

We will use the information you provide on this form to be in touch with you and to provide updates and marketing.

  Yes! I agree to and have read and understand the Data Protection Policy/Legal Information. *
  Yes! I want to receive special offers, product news and information from DirectaDentalGroup. *

You can unsubscribe at any time by clicking the link in the footer of our emails.