FAQ
The system includes 3 files in the basic sequence- the instruments are named 1,2,3.
Additional is the glide path file, S3 Glidepath file that we recommend being used with the S3 System.
The S3 Glidepath file can also be used together with other file systems where you feel that you have use of a better glide path preparation.
The S3 System can be used with either a continuous rotation or a reciprocating movement – you can choose to work with the movement you prefer.
If you are using the Sendoline Endo Motor, you will find that the setting is already installed – select the program named S3 System.
If you are using the previous Sendoline motor, the S5 motor, select setting no. 3.
If using another motor, where you can make your own settings, the recommended speed for S3 is 300 RPM and with torque 2.0 Ncm. You can use the same setting for all instruments in the S3 system, including the S3 Glidepath file.
When using the Sendoline Endo Motor, select program S1/S3 and control that you have the correct angles in the program – use 180 degrees clockwise and 30 degrees counter-clockwise.
If using another motor, where you can do your own settings for reciprocating movement you use the angels above. In addition, you need to adjust speed to 380 RPM and torque to 3,0 Ncm.
You can also use the Sendoline S1 contra angle that you connect to your dental unit. In that case you don’t need to do any settings, just make sure that you are using full speed on your foot pedal.
Already when developing the reciprocating system, S1, Sendoline used a reciprocating movement with a bigger angle in the clockwise direction, the files have a positive cutting angle.
The positive cutting angle is the reason that we can use the same instruments with both a continuous rotation and reciprocating movement.
Sendoline S3 instrument number 1 is size 30/08
Sendoline S3 instrument 2 is size 30/06, and instrument number 3 is size 30/04.
The glide path instrument is a size 20/04.
All instruments come in the 25 mm length and 31 mm length – except the coronal flaring file no 1 which is 19 mm.
Yes, the instruments in the system are heat treated, except for the S3 instrument no 1 that has a traditional Niti alloy.
Yes, all S3 instruments are delivered in a pre-sterilized package/blister, ready to use.
All instruments are packed in pre-sterilised blister packs, ready to use.
There is an assortment pack – one file of each size, file #1 in 19mm length, all others in 25mm length.
There are also refills of each size, packed in a blister of 6 instruments.
Refills are available in either 25mm or 31mm lengths for sizes #2, #3 and the GP file.
The #1 instrument is 19mm.
The possibility to apply SendoSeal MTA direct into the root canal is of
course a handling benefit.MTA based materials needs moisture to set, SendoSeal MTA will receive
moisture from the humidity and in addition there is always moisture in the root
canal, that’s the reason that you don’t have to mix the material.If you don’t dry the root canal completely you will notice that the
setting time for the material will be reduced.
The initial setting time is 12,5 minutes. In all MTA based materials, products the setting/ hardening of the material will continue over a longer time.
Yes, that is possible, but in a case that you need to do so we recommend that you use a warm plugger to be able to remove the master point gutta-percha to a point where you would like to place your post.
After that you prepare for you post as you normally do.
If you don’t want to / or do not have a warm plugger available, we recommend that you wait 48 hours before preparing for a post.
The SendoSeal MTA shall be stored in room temperature. The syringe shall be stored in the aluminium pouch in between use.
Yes, you can use other types of cannulas, with a Luer lock mount. Please note that the smaller dimension you choose for you cannula, the harder it is to press the material out of the syringe.
SendoSeal MTA has a radiopacity of 10,5 mm AL.
SendoSeal MTA has a film thickness of 15 μm.
Yes.
We recommend that you clean, disinfect and lubricate the contra-angle in-between every patient. For more details, please consult the instructions for use.
The Sendoline S1 files are pre-sterilized and ready to use, we recommend that you use them as single-use prior to expiration date.
This situation can occur in a very long root canal, where the files working part is passing the floor of the cavity. The best way to avoid this situation is to use a brushing motion with the file on the “way out” of the canal during preparation.
You can use the Sendoline S1 files and the Sendoline S5 files in the S1 contra-angle handpiece.
No, it will be very difficult to do the obturation already after a size 15/06. Our recommendation is to prepare the canal up to a size 25/06 (S1 Plus file) before obturation.
Yes, Sendoline Big Apical Files STERILE in sizes ISO 35, ISO 40, ISO 45 and ISO 50, all with a taper of .04, are available for use with the S1 system.
Use the Sendoline S1 Small file in cases with very narrow canals if the Sendoline S1 Plus (25/06) file does not reach working length. After reaching working length with the Sendoline S1 Small file, finish the preparation with the Sendoline S1 Plus (25/06) file.
Yes, the instruments are ready to use out of the package.
No, and there is no need for it. The reciprocating movement enables safe progression of the S1 files without torque control.
The S1 Plus file has an S-shaped cross section with a positive cutting angle.
Yes, all are sterile blister packed. Ready to use.
Yes, just connect the S1 Apex Clip to the Sendoline S1 contra-angle handpiece and your apex locator to the apex clip.
Sendoline Endo Motor is manufactured by Woodpecker for Sendoline. That information is also clearly noted on the product package box and in the IFU.
Sendoline Endo Motor have specific programs to be used with the Sendoline file system, you don’t find that in other motors.
Yes, you can use the standard Woodpecker motor, and other motors if the motor do have the open programs that you can set yourself.
You will need to program the recommended settings for the systems.
You will only find the Sendoline programs for Sendoline files in the Sendoline Endo Motor.
It is a 2000mAH lithium battery.
You charge the Sendoline Endo Motor in the cordless charging station when needed. The charging station comes with the Sendoline Endo Motor.
With a fully charged battery you can work approximately 2,5 hours.
The contra angle shall be internally and externally cleaned – and most important the contra angle shall also be lubricated regularly.
The contra angle head can of course be autoclaved – use the same program as you are using for your other contra angles.
Make sure that you read the instructions for use for detailed information regarding maintenance.
Other parts, the motor handpiece and charging station shall be wiped with a soft cloth and disinfection solution.
There are different ways to lubricate the contra angle. The easiest way is to use the little adapter that comes with the contra angle- with that you can use a spray bottle with oil for the lubrication.
You can also use a lubrication machine like DAC, iCare or similar. For that you will need adapters- ask your local service technician for help.
12 months (except for apex locator accessories).
There are programs to be used with the Sendoline S5 system – in continuous rotation movement.
For the Sendoline S1 System there are program prepared, you just need to set the angles yourself.
In addition, there are open programs for both reciprocating movement as well as continuous rotation movement- meaning that the motor is open to be used with most systems.
You need to do the settings yourself.
No, when coming back to the motor after a break, you will find that the last used program is the program that shows up first.
Yes, there is a built-in apex locator that can be used during preparation or as stand alone.
The motor handpiece and measuring wire shall be wiped with a soft cloth and disinfection solution.
The file clip and the lip clip can be autoclaved.
The Sendoline S3 System can be used with either a continuous rotation or a reciprocating movement – you can choose to work with the movement you prefer.
If you are using the Sendoline Endo Motor, you will find that the setting is already installed- select the program named S3 System.
If you are using the previous Sendoline motor, the S5 endo motor you shall select setting no 3.
If using another motor, where you can do your own settings the recommended speed for S3 is 300 RPM and 2,0 Ncm in torque. You can use the same setting for all files in the S3 System, including the S3 Glidepath file.
Yes, the Sendoline S5 Rotary Files can be used in the S1 contra-angle handpiece.
Luxator Periotomes are used to cut the periodontal ligaments and loosen the tooth. The Luxator Forte lifts (elevates) the tooth.
Luxator Periotome is a surgical instrument specially designed for extraction by vertical luxation, correctly used an indispensable instrument in every dental clinic. The tip of the instrument is very thin and sharp to be inserted into the periodontal space between bone and tooth, cut off the ligaments and at the same time compress the alveolar bone. To bend, chip or otherwise damage the tip strong elevation forces are required that may not occur by regular vertical luxation. Should such forces be applied there will be damages to the cheekbone before damage to the tip is made. Luxator Periotomes are not intended for use as elevators! Any kind of use for leverage will result in damages to the tip. The surgical tip is made of hardened stainless special steel specifically developed for surgical instruments thus making a very strong instrument despite the precision thin tip. The hardening process also gives excellent durability in the sharpness of the instrument. In order to meet the demand for elevating technique Directa developed Luxator Forte which is specially designed for tooth elevation.
Depending on the tooth to loosen a curved periotome might guarantee a better access.
A special sharpening stone is available, suitable for all Luxator instruments from 1mm periotomes to Forte. To sharpen a periotome, place the concave surface of the blade tip on the sharpening stone and make strokes. Lift the blade after each stroke and repeat until the blade is sharp. The stone should always be lubricated with sharpening oil or water to avoid clogging of the surface with debris. For best results, sharpen your Luxator instrument regularly with a Luxator sharpening stone. Sharpen the Luxator instrument after thorough cleaning and before sterilisation.
The bottom of the outer shell is reinforced to give additional protection to the teeth preventing perforation. The soft silicone, covered by the polythene film, moulds to teeth giving all round support and protection. The combination of the hard outer shell and soft lining gives the device strength yet allows it to adapt to the patient’s dentition ensuring full protection and minimal risk of dislodgement.
Camo tooth protector fits most jaws, both mandibular and maxillary. For a smaller jaw, the shell can be trimmed with a sharp instrument. Both jaws can be protected simultaneously without excessively diminishing the necessary area for peroral endoscopies.
Yes, for single use only. Should not be sterilised or reused as this may compromise the intended use.
To prevent inhalation or ingestion, a cotton cord is attached to the shell. The silicone makes the dental splint firm and sturdy. To prevent fragments dislodging, the silicone is wrapped by a thin polythene film. Do not remove the film.
To separate the teeth for a restoration with better contact and to achieve a faster and safer preparation with no risk to damage the adjacent tooth.
The maximum bur length (total instrument) that can be mounted on the compact bur stand is 34 mm.
Use low alkaline detergents. Do not use chlorine products, which can damage plastic materials. Remove residues or composite and organic materials from instruments and trays as they will not disappear by themselves during the cycle. The bright colour of plastic components may fade slightly after several cycles. This does not affect the quality of the product.
ProphyCare Red, ProphyCare Yellow or ProphyCare PRO lilac.
Yes – ProphyCare Yellow, ProphyCare Red, ProphyCare Green, ProphyCare Blue and ProphyCare PRO Lilac, contains fluoride.
A general recommendation depending on the clinical situation is to use more than one paste. Start with high abrasiveness (e.g., blue or green) and finish with the less abrasive paste for polishing (e.g., red or yellow).
The exception is when you use ProphyCare PRO or ProphyCare HAp, which offer a one-step procedure with effective stain removal properties at the beginning of the treatment and polishing at the end with the same prophy paste.
Yes. ProphyCare PRO and ProphyCare HAp are one-step prophylactic paste where you get effective stain removal properties at the beginning of the treatment, then the abrasive effect gradually reduces, giving the paste its final polishing properties at the end of the treatment.
Yes, there are paraben-free versions of ProphyCare Yellow, ProphyCare Red, ProphyCare Green and ProphyCare Blue.
The paste consists of silica particles of different sizes. We have chosen to colour some of the largest particles blue – so that the user can see how large the largest particles are, and to make it easier for us to explain how the paste works. It also adds a nice colour. Sometimes some of the coloured particles are left in the mouth after the first rinse, but they are completely harmless to the patient.
The Physics Forceps are an atraumatic extraction system that provides a simple, predictable and unconventional method of extracting teeth regardless of a practitioner’s extraction experience, or the condition of the tooth, while providing a positive patient experience.
The Physics Forceps operate as an elevator, rather than forceps, using first-class lever mechanics. One handle is connected to a ”bumper,” which acts as the fulcrum, that is placed deep in the vestibule. The other handle is connected to the ”beak”, which is positioned most often on the lingual or palatal root of the tooth into the gingival sulcus. No aspect of the instrument grasps the crown and there is no advanced elevation needed. Once the instrument is properly placed, the handles are rotated a few degrees with only wrist movement in a slow, steady and controlled manner – no squeezing!
The Physics Forceps are effective in most cases, including decayed or broken down teeth, endodontically treated teeth, fractured or fragile teeth, curved or long rooted molars and cuspids, or any tooth that would historically be challenging with conventional instrumentation. The Physics Forceps are ideal for implantologist that wants to preserve the surrounding bone and tissue in preparation for dental implants.
The Physics Forceps place a constant and steady load on the tooth, allowing ”creep” to build, releasing hyaluronic acid, resulting in the break down of the periodontal ligaments. Studies have proven this breakdown occurs in a much faster time period than conventional methods that employ intermittent, rocking or brute strength types of forces.
The Starter Kits are a good place to start, they give you everything you need to make a full mouth series. Once you have used your Starter Kit, you may find that you use the Yellow Holder or other colours more often and can order refill kits of each individually coloured holder.
The Bite Block is only required with the Blue holder to take anterior images, a Bite Block is not required when using the Yellow or Red holders.
The Bite Block slides onto the (pin) on the arm of the holder when taking anterior images only. The Bite Block allows you to instruct the patient to bite further back on the Bite Block so that you can move the holder and sensor further back into the highest part of the arch in the mouth, this moves the sensor away from the teeth to ensure you get a proper image and the sensor isn’t too close to the teeth.
Yellow Holder takes PA’s and Horizontal Bitewings (12 images)
Red Holder takes Horizontal Bitewing images
Blue Holder take Vertical Bitewings and Anterior images
You do not need the Red Holder for a Full FMX, the Yellow and Blue Holders take a Full FMX.
The Red Horizontal Bitewing Holder is a great option when you know you will only be taking Horizontal Bitewing images, some clinicians prefer to have one Holder specifically for HBW images, so the Red Holder is an option for those who prefer an individual HBW Holder.
You simply move the sensor up, down, and in the centre of the holder and turn the holder when placing the sensor in the mouth to get all 12 images.
No, Trollbyte Kimera is a one-piece design requiring no assembly.
Run your finger along the Arm of the Holder, you will feel a notch, snap the Aiming Ring into the notch, slide the Aiming Ring either forward or backward from the notch to lock the Aiming Ring in place. To remove the aiming ring, slide it back to the notch and remove it.
No, you will see a (pin) on the arm of the holder, if you line up the centre of the cone with the tip of the (pin) you will get a perfect shot.
Luxator Periotomes come in light handles (grey, pale blue or pale yellow) while the Luxator Forte comes in a black handle. The blade also differs.
Examples of use for Luxator Periotome, Titanium and Short Periotome
L1S: Apical and/or interproximal (L1S is extremely sharp and delicate, use with caution)
L2S, S2S: Apical and/or interproximal
L3C, S3C: General use/starter
L3S, S3S, L5S, S5S: Interproximal
L3CA, S3CA: lingual and/or distal – molars
L3IC: General, lingual and/or distal
L5C: Large molar roots – general use
Examples of use for Luxator Dual Edge Periotome
DE3, DE5: Deep fractured and decayed roots. (DE3 is extremely sharp and delicate, use with caution) Examples of use for Luxator Forte Elevator
F25, F32, F32C, F40: Elevation
ProphyCare Blue 250 and ProphyCare Green 170 are pumice-based pastes used for removal of plaque, calculus and stains caused by e.g., coffee, tea, tobacco.
ProphyCare Red 120 and ProphyCare Yellow 40 are finer hydrated silica based prophylactic pastes used for a gentle removal of small amounts of plaque and lighter stains, final polishing of teeth, as well as polishing of implants, porcelain crowns and composite restorations.
The S1 Small file is indicated for very small / narrow root canals. In canals where the S1 Plus 25/06 file cannot easily proceed to working length, use the S1 Small 15/06 file.
SendoCem MTA is indicated for indirect pulp capping, direct pulp capping, pulpotomy, perforation and for root end fillings.
SendoCem MTA has a medium consistency that allows the material to be applied directly to the treatment area – at the same time it is easy to pack as it doesn’t flow when placed.
Approximately 8 mm AL, which makes it easy to see and assess on an X-ray image.
Setting time for SendoCem MTA is 3-5 minutes.
The cannulas are delivered with the package – 20 pcs, 22 gauge, non-sterile. You can autoclave the cannula.
No.
No.
Discolourations are sometimes a problem when the MTA materials contain bismuth oxide. SendoCem MTA does not contain bismuth oxide.
SendoCem MTA is a calcium silicate material – the composition is tricalcium silicate, zirconium dioxide, calcium aluminate, DMSO.
If you need more detailed information, please consult our MSDS.
SendoCem MTA has a compressive strength of 75 MPa, which in comparison with other MTA cements is high. A high compressive strength is important when a restoration is done on top of the cement.
Store SendoCem MTA at room temperature. The syringe shall be recapped and stored in the aluminium pouch between uses.
Yes – we recommend that you use a glass ionomer material if you wish to perform a filling/restoration directly after placing SendoCem MTA.
The most important thing is to ensure that you don’t use phosphoric acid on SendoCem MTA.
SendoCem MTA is applied in three steps;
– Apply SendoCem MTA in an appropriate thickness.
– Place a wet cotton pellet on top of SendoCem MTA to allow the solvent and water to exchange and start the setting process.
– After 3 minutes, condense by lightly tapping with a wet micro-brush, then continue with routine treatment.
For specific recommendations for different indications, please refer to the instructions for use included with the product.
SendoCem MTA sets into contact with moisture that is always present in the cavity.
When perfoming a pulp capping or pulpotomy, it is recommended to apply the material in the working area and pack it with a wet micro brush.
Ceramir CAD/CAM BLOCK represents a new type of material- it doesn’t fit into to any of the classifications of materials as we know them before.
Ceramir CAD/CAM BLOCK belongs to a different class of material, it is a bio ceramic glass dental material.
The Ceramir T-BLOCK (Enamel block) is a highly translucent block that mimic the natural enamel in terms of optical properties. The final shade of the restoration can be individually adjusted by using a shaded composite cement. The translucency in the T-BLOCK will also adapt colour from the surrounding tooth.
For a highly aesthetic case the Ceramir T-BLOCK will be suited as the underlying dentin shade and together with a shaded composite cement will make it possible to adapt the colour of the final restoration to perfection.
The Ceramir C-BLOCKS are chromatic CAD/CAM blocks that correspond to the shades A0, A1, A2 and A3 in the VITA shade guide.
The Ceramir CAD/CAM T- Block is often the best choice as you can individualize it with your cement. In addition, the block will due to its translucency blend in with the natural tooth.
The C-blocks will however be the best choice if there is a discolouration in the preparation that needs to be covered- the same thing is if you are working with an implant, and the abutment is grey/metal.
The Ceramir i-blocks are CAD/CAM blocks used for precise and reliable fabrication of implant-supported restorations. The i-Blocks fits onto T-base (or similar attachments).
The Ceramir i-Blocks are compatible with Alphatec, BIOMET 3i, Dentsply Sirona, Nobel Biocare, Straumann and many others via the T-base interface.
The i-Block can be used both as a meso-structure and a final crown in implant supported prosthetics
The Ceramir CAD/CAM BLOCKS are manufactured through a process of laser sintering and vitrification. Through this process the glass particles are fused, and the final product consists of a single hybrid glass phase embedded in a resin matrix.
The result is a highly aesthetic material with a translucency similar to felspathic glass ceramic without having the brittleness of a pure ceramic material.
The glassy matrix defines the aesthetic properties of the material. The higher the glass content, the greater the translucency is- which will imitate the properties of enamel.
No, due to a small portion of resin that retains in the material after the manufacturing process the material has flexibility and elasticity. The e-modulus is 20 GPa, which is similar to dentin.
Restorations milled from Ceramir CAD/CAM BLOCKS offers very good mechanical properties.
In the table below you find information of the most important mechanical properties.
In terms of strength- flexural strength as well as compressive strength Ceramir CAD/CAM BLOCK is very similar to values we see from lithium disilicate materials.
What’s interesting and stands out when comparing Ceramir CAD/CAM BLOCKS with ceramic materials is that Ceramir CAD/CAM BLOCK shows bio mimetic properties when looking at resilience / flexibility it is similar to what we see in natural dentin.
The same is when looking at surface hardness- Ceramir CAD/CAM BLOCKS shows 100 HV placing it in right in between the values that we see from natural enamel and natural dentin.
- Anterior and posterior single crowns
- Partial crowns
- Implant supported single crowns.
- Inlays and Onlays
- Veneers
Prepare margin with chamfer or rounded shoulder preparation. For inlays/onlays all internal edges and angles should be rounded. Avoid margins in direct occlusal contact with opposing tooth.
Minimal thickness of the restoration should be 1,5 mm in pit and fissure areas as well as in cusp areas.
For veneers minimal wall thickness is 0,5 mm and it can be reduced down to 0,3 mm in the cervical area.
We recommend that you use diamond burs. Follow the instructions from the device manufacturer.
For best possible result we recommend a wet grinding/milling process.
Ceramir CAD/CAM BLOCKS are compatible with most milling devices. The blocks are available in size 12x14x18 mm.
Block size and milling parameters are standard parameters and are available in all software settings of CAD/CAM Systems.
Select a program used for hybrid blocks.
Pre-set programs for Ceramir CAD/CAM BLOCKS is to be found in milling units from:
- Amann Girrbach
- vhf camfacture
- Orangedental
- DG Shape / Roland
The program can be called edelweiss cad cam block or Ceramir CAD/CAM BLOCKS.
Smooth out the attachment point of the block with a fine grain diamond bur- make sure that proximal contacts are correct. If needed, carry out individual shape adjustments and surface structure.
Final polishing is done by using a rubber cup/ wheel and cotton linen buffs.
We recommend that you use an adhesive resin based shaded composite or composite cement for the cementation.
Follow the instructions for use for the cement manufacturer.
For more detailed information see the Ceramir CAD/CAM BLOCKS IFU.
Yes.
After the try in of the restoration is confirmed, the restoration must be treated with a hydrophobic primer prior to cementation. We recommend that you use Edelweiss Veneer bond. Other bonding materials can be used, for more alternatives, brands- see Ceramir CAD/CAM BLOCKS IFU.
Apply a thin layer of or Edelweiss Veneer bond onto the surface of the restoration, rub the surface for 20 seconds. Gently airdry the surface with an oil free air.
Yes, prepare the tooth using an adhesive composite bonding- follow the instructions for use from the manufacturer.
All excessive cement must be removed.
Occlusal contacts can be adjusted with a suitable grinding instrument, also interproximal areas need to be cleared of any excess cement using a finishing & polishing strip- we recommend you use the ContacEZ finishing strips.
Final polishing of the restoration is achieved using a cotton/linen buff for a high gloss finish.
The glass component blocks like feldspathic glass shows a very high aesthetic look, but they are brittle.
The high strength materials, like zirconia lack the aesthetics- and the composite CAD/CAM blocks lacks both strength and aesthetics, but they have a favourable elasticity.
Ceramir CAD/CAM BLOCK is made of a single glass phase, with only a small amount of resin, this provides the material with similar strength as high strength ceramic materials and aesthetic appearance like glass ceramics without the brittleness. Ceramir CAD/CAM BLOCKS has due to the resin content an elasticity of 20 GPa, similar to dentin.
Ceramir CAD/CAM BLOCK is simply a unique combination of features, strength, aesthetics, and elasticity!
Yes, the Ceramir CAD/CAM restorations can be both modified and repaired without affecting the properties of the material.
If a reparation inside the mouth is necessary, the surface of the restoration shall be roughened with a diamond bur.
Step two, apply a hydrophobic bonding to the surface of the restoration- we recommend the Edelweiss Veneer bond.
Also, other bonding materials can be used- for more detailed information see the IFU for Ceramir CAD/CAM BLOCKS.
Always follow the IFU from the manufacturer of the bonding material.
Apply a resin-based light cured composite to the area that needs to be repaired.
Final polishing of the composite is done by following the Instructions for use from the manufacturer.
Ceramir Pediatric Crowns are prefabricated, pre-contoured, aesthetic crowns designed specifically for primary teeth. They are made from a unique manufacturing process that produces a material that has improved strength and are available in various sizes and shades.
Ceramir Pediatric crowns are an aesthetic, durable paediatric crown with excellent handling features.
Ceramir Pediatric are available in 4 different sizes, small, medium, large and X large. The size guide makes it easy to find the correct size for each case. In addition, the crowns are easily adjusted for a perfect fit.
Ceramir Pediatric crowns are prefabricated and come in one shade with a high translucency, giving the possibility to adapt the final shade of the restoration by using a shaded resin composite for the cementation of the crown.
The Ceramir Pediatric crowns with its patented manufacturing process results in a very durable material- however the lifespan of the crown can vary due to the patient’s oral hygiene.
Yes, the Ceramir Pediatric crowns are indicated for both anterior and posterior restorations.
Ceramir Pediatric are suitable for many cases, as with all cases it is essential to evaluate each patient individually.
Patients with severe bruxism and insufficient tooth structure or allergy to the material are not suitable for cases for Ceramir Pediatric Crowns.
Tooth preparation is minimal. Remove decayed areas, shape the tooth slightly, and ensure a dry field before cementing the crown.
The recommended cement for Ceramir crowns is a resin-based light cured composite, Dual Cure Resin Cement, Self-Adhesive Resin Cements, Resin Modified Glass Ionomer Cement or Ceramir Crown & Bridge cement. Always follow the manufacturer’s instructions for the best results.
The Ceramir Pediatric Crowns comes in many different sizes, and are possible to adjust with a diamond bur. The crowns can in addition be slightly individualized in the mouth after seating.
The Ceramir Pediatric Crowns are made of a highly strengthened hybrid glass material with a small amount of resin content- the manufacturing process is a patented unique laser sintering process. The result is a more resilient giving material with a natural feel for the patient.
There are several reasons why the Ceramir Pediatric Crown is favourable to use compared to a Zirconia crowns.
THE MATERIAL USED IN CERAMIR PEDIATRIC CROWNS
The Ceramir Pediatric Crown material is not as hard as the Zirconia crowns that is extremely hard and can be damaging to the opposite tooth- the Ceramir Pediatric Crowns will have more natural feel for the patients.
TOOTH PREPARATION
By using the Ceramir Pediatric Crowns the preparation can be more conservative and minimized, less tooth structure needs to be removed compared to a Zirconia crown that needs more space to accommodate the crown’s thickness.
AESTHETICS
The material consists of a natural glass phase, closely mimicking the natural appearance of teeth, providing a high level of aesthetics, whilst a Zirconia crown have a mor opaque appearance to natural teeth.
DURABILITY:
Ceramir Pediatric Crowns has strength more compatible to the natural tooth with its high bond strengths to tooth structure make these crowns durable, lasting the lifetime of the deciduous tooth.
Zirconia crowns are known for their very high strength and durability, making the resistant to fracture. However, when it comes to child patients, the primary concern is the long-term health and development of their natural teeth. Zirconia crowns may be considered too strong for child patients’ teeth because they do not provide the same level of flexibility and adaptability as natural teeth. This lack of flexibility can potentially put excessive stress on the underlying tooth structure, leading to complications or damage over time. Therefore, dentists may prefer to use more conservative treatments options for children.
WEAR RESISTANCE
Ceramir Pediatric Crowns have a surface hardness between natural enamel and dentin (HV 100) making its wear pattern similar to that of the natural tooth.
The surface hardness of zirconia crowns is very high which may cause them to remain intact while the surrounding natural teeth wear down. This discrepancy in wear rates could potentially lead to an uneven bite or occlusion, affecting the child’s natural bite alignment.
FIT AND RETENTION
Ceramir Pediatric Crowns, having a resin material giving it a modulus of elasticity of 20 GPa behaving similar to dentin. This allows for natural flexibility and excellent fit to the primary tooth. When bonded to tooth structure its acts as a monobloc with the primary tooth allowing for the natural micro-movements of the tooth.
Zirconia crowns require extensive tooth shaping and adjustments for an optimal fit. Its high strength does not allow for natural tooth movements.
REPAIRABILITY
In the event of chipping or fracture, Ceramir Pediatric Crowns can easily be repaired chairside with additional composite material.
Zirconia crowns may be more challenging to repair.
COST
Ceramir Pediatric Crowns are generally more cost-effective compared to zirconia crowns.
Zirconia crowns tend to be more expensive due to the higher cost of the material.
Zirconia crowns will also require more chairside preparation time compared to Ceramir Pediatric Crowns making Ceramir Pediatric Crown placement more comfortable to the child patient.
Thinner is better, especially when trying to reach that hard-to-get spot. Thicker articulating products provide less accurate markings.
TrollFoil is a foil, not paper, the foil holds the colour which is released when the patients tap their teeth together, no need to grind and recheck, just tap, tap, tap. Foil is a stronger material than paper and releases the colour accurately.
The colour is carbon-based, not wax-based, and is released precisely when the patient taps their teeth together. TrollFoil is not like a wax-based colour. TrollFoil will not smear. This eliminates any guesswork. You know exactly where to go.
It marks on wet, dry, and highly polished fields. It is the only articulating product you will need to mark on all surfaces.
No, TrollFoil comes on its own frame, you simply tear off the cover and go straight to the mouth without using a forceps, one less thing to have to autoclave. You can use forceps if you choose but it is not necessary.
TrollFoil will mark all areas and surfaces, wet, dry, and highly polished. TrollFoils markings are so accurate it takes the guessing away saving time and money. You don’t need a forcep because it has a built-in frame and comes individually stacked in a box so you can just take out one strip at a time, no cutting.