You will need a bite block for all anterior periapical images. The bite block works as an extension of the biteplane and allows you to place the sensor as posterior as possible in the mouth. Place the bite block on the holder by sliding it over the biteplane and small aiming pin.
Aiming Ring
The colour markings on the aiming ring are linked to the colour of the holder. You can slide the aiming ring along the holder for adjustment. Position for the ring on the arm of the holder, dots facing the sensor. This makes it easy to put the ring in the correct position depending on which image you are taking.
Endo Block
Endo Block act as an extended bite area of the holder´s bite plate and has an open space to gather files in. Colour coded for easy identification. Green – use for left upper jaw/right lower jaw. Red – use for the right upper jaw/left lower jaw.
The Starter Kits are a good place to start, they give you everything you need to make a full mouth series. Once you have used your Starter Kit, you may find that you use the Yellow Holder or other colours more often and can order refill kits of each individually coloured holder.
The Bite Block is only required with the Blue holder to take anterior images, a Bite Block is not required when using the Yellow or Red holders.
The Bite Block slides onto the (pin) on the arm of the holder when taking anterior images only. The Bite Block allows you to instruct the patient to bite further back on the Bite Block so that you can move the holder and sensor further back into the highest part of the arch in the mouth, this moves the sensor away from the teeth to ensure you get a proper image and the sensor isn't too close to the teeth.
Yellow Holder takes PA's and Horizontal Bitewings (12 images)
Red Holder takes Horizontal Bitewing images
Blue Holder take Vertical Bitewings and Anterior images
You do not need the Red Holder for a Full FMX, the Yellow and Blue Holders take a Full FMX.
The Red Horizontal Bitewing Holder is a great option when you know you will only be taking Horizontal Bitewing images, some clinicians prefer to have one Holder specifically for HBW images, so the Red Holder is an option for those who prefer an individual HBW Holder.
You simply move the sensor up, down, and in the centre of the holder and turn the holder when placing the sensor in the mouth to get all 12 images.
No, Trollbyte Kimera is a one-piece design requiring no assembly.
Run your finger along the Arm of the Holder, you will feel a notch, snap the Aiming Ring into the notch, slide the Aiming Ring either forward or backward from the notch to lock the Aiming Ring in place. To remove the aiming ring, slide it back to the notch and remove it.
No, you will see a (pin) on the arm of the holder, if you line up the centre of the cone with the tip of the (pin) you will get a perfect shot.
Thailand, India, Indonesia, Vietnam, Philippines, Taiwan, HongKong, Cambodia, Singapore, Malaysia
Dan Fukushima
Japan, South Korea, China (not Taiwan, HongKong), Australia, New Zealand, Ukraine
Tina Lidström – Sales Coordinator
Contact
Cookies and Privacy
We use cookies to improve your browsing experience, display personalised ads or content and analyse our traffic. By clicking "Accept all" you agree to our use of cookies.
Read our cookie policy
