€2,171.32
Sendoline Endo Motor can be used with both reciprocating movement as well as continous rotation and offers cordless freedom and perfect visibility. The neat contra-angle handpiece, with narrow neck and small head is rotatable 360 degrees, giving you better and easier access in the mouth with perfect visibility.
Sendoline Endo Motor can be used in three different modes;
Complete kit contain: 1 x Handpiece, 1 x Contra angle, 1 x Charging base, 1 x Spray nozzle, 1 x APEX measuring wire, 4 x APEX File clip, 2 x APEX Lip hook, 2 x APEX Touch probe, 1 x Charging adapter, 2 x Protective Silicon cover, 2 x O-ring
If you are using the Sendoline Endo Motor, you will find that the setting is already installed - select the program named S3 System.
If you are using the previous Sendoline motor, the S5 motor, select setting no. 3.
If using another motor, where you can make your own settings, the recommended speed for S3 is 300 RPM and with torque 2.0 Ncm. You can use the same setting for all instruments in the S3 system, including the S3 Glidepath file.
When using the Sendoline Endo Motor, select program S1/S3 and control that you have the correct angles in the program - use 180 degrees clockwise and 30 degrees counter-clockwise.
If using another motor, where you can do your own settings for reciprocating movement you use the angels above. In addition, you need to adjust speed to 380 RPM and torque to 3,0 Ncm.
You can also use the Sendoline S1 contra angle that you connect to your dental unit. In that case you don’t need to do any settings, just make sure that you are using full speed on your foot pedal.
Sendoline Endo Motor is manufactured by Woodpecker for Sendoline. That information is also clearly noted on the product package box and in the IFU.
Sendoline Endo Motor have specific programs to be used with the Sendoline file system, you don’t find that in other motors.
It is a 2000mAH lithium battery.
You charge the Sendoline Endo Motor in the cordless charging station when needed. The charging station comes with the Sendoline Endo Motor.
With a fully charged battery you can work approximately 2,5 hours.
The contra angle shall be internally and externally cleaned - and most important the contra angle shall also be lubricated regularly.
The contra angle head can of course be autoclaved – use the same program as you are using for your other contra angles.
Make sure that you read the instructions for use for detailed information regarding maintenance.
Other parts, the motor handpiece and charging station shall be wiped with a soft cloth and disinfection solution.
There are different ways to lubricate the contra angle. The easiest way is to use the little adapter that comes with the contra angle- with that you can use a spray bottle with oil for the lubrication.
You can also use a lubrication machine like DAC, iCare or similar. For that you will need adapters- ask your local service technician for help.
There are programs to be used with the Sendoline S5 system - in continuous rotation movement.
For the Sendoline S1 System there are program prepared, you just need to set the angles yourself.
In addition, there are open programs for both reciprocating movement as well as continuous rotation movement- meaning that the motor is open to be used with most systems.
You need to do the settings yourself.
No, when coming back to the motor after a break, you will find that the last used program is the program that shows up first.
Yes, there is a built-in apex locator that can be used during preparation or as stand alone.
If you are using the Sendoline Endo Motor, you will find that the setting is already installed- select the program named S3 System.
If you are using the previous Sendoline motor, the S5 endo motor you shall select setting no 3.
If using another motor, where you can do your own settings the recommended speed for S3 is 300 RPM and 2,0 Ncm in torque. You can use the same setting for all files in the S3 System, including the S3 Glidepath file.
