If I would like to use the Sendoline S3 System with reciprocating movement, what settings shall I use?

When using the Sendoline Endo Motor, select program S1/S3 and control that you have the correct angles in the program – use 180 degrees clockwise and 30 degrees counter-clockwise.
If using another motor, where you can do your own settings for reciprocating movement you use the angels above. In addition, you need to adjust speed to 380 RPM and torque to 3,0 Ncm.
You can also use the Sendoline S1 contra angle that you connect to your dental unit. In that case you don’t need to do any settings, just make sure that you are using full speed on your foot pedal.